A flexible panel suited for DIN-rail mounting. The panel is modular and may be delivered in variable sizes. The base unit has room for up to 24 LC-connectors or 12 SC– or ST-connectors. The add-on unit has room for the same amount of connectors. The extending with an extra unit is done by removing the lid from the base unit and attach the add-on unit instead. The lid is then put on the add-on unit. In this way we may deliver panels with 48, 72, 96 or more connectors by increasing the total with of the panel. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus, FuseConnect) or by splicing pigtails. Adapters, DIN-Rail clips and splice holder are included.
The panel may be delivered with pigtails or pre-terminated cable type AXAI, QXXI or Micro-cable. AXAI have tight buffer and up to 24 fibre, a panel with 48 fibre will therefore be delivered with 2 cables.
The panel may also be delivered with CWDM multiplexer and de-multiplexer. Two panels (one at each end of the link) will then make a complete system with necessary components for duplex communication. All connectors (both in and out) are at the front.
The DIN-rail clip is mounted in the back, on the short side. By using a bracket (not included) the panel may be mounted with the long-side towards the wall - either by using the DIN-clip or by screwing it directly to the wall. The same bracket enables you to place the panel on a standard flush-mounted wall-box.
A flexible panel suited for DIN-rail mounting. The panel is modular and may be delivered in variable sizes. The base unit has room for up to 24 LC-connectors or 12 SC– or ST-connectors.
Foss AS Fiberoptisk Systemsalg
Box 3614, 3007 Drammen,
Company id: NO936010229MVA
+47 32 21 08 00
Foss Fibre Optics s.r.o
Odborárska 52, 831 02 Bratislava
+421 2 48 205 200
News and Articles
Sales and delivery conditions
COPYRIGHT 2022 - FOSS FIBEROPTIKK - ALL RIGHTS RESERVED