Splice closure, FIST-GCO2-FC8
- Outdoor use
- Casing class IP68
- Type of splice trays: FIST-SOSA2
- Capacity: 32/96 with resp. SC/SE tray (250 to 250 µm)
- 8 round cable entries
- Prepared for gel seals
- Possibility for storing uncut fibre (midspan access)
Dimensions: 384x279x150 mm (HxWxD).
Splice closure fits the Cable Management frame type B4.
The cable management frame is primarily used in access points in FTTH networks. It is mounted to wooden poles using the included screws. The frame consists of a main part where the closure is fastened with a strap (included) and a pole part that is mounted to the pole. The main part may rotate on the pole part witch is practical when winding up the cable.
The bend limiter is a chain with a given minimum diameter that is used when uncut fibre tubes shall be led through the oval hole of a splice closure. With the chain, the tubes can be led into the closure in a safe manner without risking breakage.
Optical splitter FSASA3 1:4, the tray can be mounted in all wall boxes and splice closures designed for FIST trays. (e.g.. FIST-GCO2 or BUDI). There, the splitter can easily be spliced to the desired fibres.
Pole mount bracket for wooden poles made of composite materials. The bracket fits both Cable Management frames (B4 and D5) and provides a good distance between the Cable Management frame and the mast.