Splice closure in plastic in the FOSC-400G series. Prepared for gel seal. Splice closure consists of few parts and is very easy to install.
- Prepared for gel seal
- Indoor/outdoor use
- Casing class IP68
- Capacity of 48 splices (250 to 250 µm)
- 24 splices in each tray
- 2 trays (1 tray included)
- 2 round cable entries + 1 oval
- Storage basket included
Dimensions: 420x205 mm The splice closure fits the Cable Management frame type B4.
Tray for FOSC splice closures. Fits FOSC-400A4/24/48 and FOSC-400A8/24/96
The Cable Management frame fits several types of splice closures on the market.
The bend limiter is a chain with a given minimum diameter that is used when uncut fibre tubes shall be led through the oval hole of a splice closure. With the chain, the tubes can be led into the closure in a safe manner without risking breakage.
The OCC1P 1:32 optical splitters comes with clips for mounting in the FOSC splice closures.
The OCC1 1:8 optical splitters comes with clips for mounting in the FOSC splice closures.
The OCC1P 1:16 optical splitters comes with clips for mounting in the FOSC splice closures.
The OCC1P 1:4 optical splitters comes with clips for mounting in the FOSC splice closures.
With this gel seal you can increase the number of cable entries in certain splice closures. For all FOSC-400G, FIST-GCO2-BX and FIST-GCO2-FX
With this gel seal you can increase the number of cable entries in certain splice closures.
With this gel seal you can increase the number of cable entries in certain splice closures. For all FOSC-400G, FIST-GCO2-BX and FIST-GCO2-FX
With this gel seal you can increase the number of cable entries in certain splice closures. For all FOSC-400G, FIST-GCO2-BX and FIST-GCO2-FX
With this gel seal you can increase the number of cable entries in certain splice closures. For all FOSC-400G, FIST-GCO2-BX and FIST-GCO2-FX
With this gel seal you can increase the number of cable entries in certain splice closures. For oval port in the FOSC-400G
The bracket can be fastened to FOSC-400A2G and FOSC-400B2G. It is often used when taking many small cables into the splice closure via gel seals.
Round heat shrink tube for the splice closures FOSC-400B4/24/96, FOSC-400B4/24/144, FOSC-400D5/24/288, FOSC-400D5/72/576 and FOSC-400G.
Oval heat shrink tube for the splice closures FOSC-400B4/24/96, FOSC-400B4/24/144, FOSC-400D5/24/288, FOSC-400D5/72/576 and FOSC-400G.
The use of a work stand makes working with the rigging and mounting of splice closures easier. The stand fits all the splice closures in the FOSC series.
Tray for mounting fiber optic splitters in the FOSC splice closures.
Pole mount bracket for wooden poles made of composite materials. The bracket fits both Cable Management frames (B4 and D5) and provides a good distance between the Cable Management frame and the mast.
Only one opening prevents wrong fibre positioning
Adjustable cable management frame suitable for both small and large closures. The slim profile minimizes visibility.
Recently viewed
Splice closure in plastic in the FOSC-400G series. Prepared for gel seal. Splice closure consists of few parts and is very easy to install.