FOSS WALL BOXES
The access point terminates the fiber at the user end and is in many cases a wall mounted box. In residences, the natural choice is a subscriber boxe, while cable channel and wall outlets are preferred in office environments.
Common to all these is that the fiber can be spliced and coiled inside the boxes, despite the very compact physical dimensions.
Foss Wall box Mini
A indoor wall-mount box for termination of cables. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. Splice holder for securing the crimp sleeves when splicing pigtails and fibre guides for routing the fibre are included. An adapter plate must be ordered separately - depending on wanted connector type. The box has 2 round cable entrances and glands for both are included.
Foss Wall box Midi PRO
An indoor wall-mount box for efficient termination of cables. Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus) or by splicing pigtails. An adapter plate must be ordered separately - depending on wanted connector type. The box is delivered with a perforated assembly board for easy attachment of splice holders and fibre guides. Installation-set with these items may be ordered separately. The box has 2 round cable entrances and glands for both are included.
Foss wall box DIN Mini
A flexible and small wall box suited for DIN-rail mounting in cabinets. The box has room for up to 24 LC-connectors or 12 SC– or ST-connectors. Suitable for splicing up to 12 fibres. When using pre-terminated cable with LC the box hold up to 24 fibres. The box has 1 round cable entrances both at the bottom and the top. One M20 cable gland is included for one of the entrances, the other entrance is covered with a plug. There is also holes for 1 or 2 MPO adapters (both at top and bottom) to enable the box to hold fan-outs from MPO to e.g. LC.
The box may be delivered with pigtails or pre-terminated cable.
Foss wall box DIN
The base unit has room for up to 24 LC-connectors or 12 SC– or ST-connectors. The add-on unit has room for the same amount of connectors. The extending with an extra unit is done by removing the lid from the base unit and attach the add-on unit instead. In this way we may deliver panels with 48, 72, 96 or more connectors by increasing the total with of the panel.
The panel may also be delivered with CWDM multiplexer and de-multiplexer. Two panels (one at each end of the link) will then make a complete system with necessary components for duplex communication. All connectors (both in and out) are at the front.