Skip to main content
To top
Card payment
International Shipping
Customer Service

Interferometry

3dScope-V2

3D-Scope-v2 is the new interferometer for the use in the production environment. It was designed with speed, precision, simplicity, robustness and cost in mind. Non-compressed, real time and high quality images are transfered from the hardware to the software via a USB2.0 high speed link in addition to the automation and control commands. 3DScope-v2 has a small footprint and can be interfaced to laptop or desktop computers through one single USB 2.0 link only. All calibration steps are automated and embedded into a user-friendly software interface in order to yield error-free and reliable measurements.

  • Single unit for measurement of single-fiber, PC and APC ferrules, connectors and bare fibers
  • Lightning speed measurement cycle (0.5secs for SF connectors)
  • Autofocus option
  • PASS/FAIL result visual feedback via front panel start-button LED color
  • High resolution custom optics
  • Integrated PC/APC tilt stage, no apex re-calibration required
  • Non-contact measurement
  • True phase-shifting interferometer
  • Completely vibration insensitive. Measure while holding system in hand
  • Connector key adaptors for most connector types
  • Fast and automated measurement of radius, apex offset, fiber height + more
  • Accurate and repeatable measurements
  • Interfaceable to laptop computers, only one USB2.0 link required
  • Compliance with Industry Standards for Interferometer Measurements
  • Measure angle of cleaving of bare fibers with great accuracy
  • High resolution 2D & 3D surface profiles
  • Measurement Report and History Report in HTML format
  • Directly export measurement data into any DataBase
  • Measure Fiber and Ferrule Roughness (Sq parameter)
  • Low cost!

DAISI v2

DAISI v2 (Digital Automated Interferometer for Surface Inspection) was designed with years of industry feedback in mind in order to satisfy the most demanding requirements for the use in the production environment. Non-compressed, real time and high quality images are transfered from the hardware to the software via a USB2.0 high speed link in addition to the automation and control commands. DAISI is portable and can be interfaced to laptop or desktop computers. All calibration steps are automated and embedded into a user-friendly software interface in order to yield error-free and reliable measurements.

  • Single unit for measurement of PC and APC ferrules, connectors and bare fibers.
  • Non-contact measurement.
  • Fast autofocus.
  • One-button easy operation.
  • Servo-controlled reference mirror for automatic Apex calibration.
  • Strongest ferrule holder in the industry with automated open/close feature. Can perform measurements while handling the cable.
  • No exterior moving parts or adjustment screws.
  • No apex decalibration.
  • Vibration insensitive. Measurements can be made when holding the system by hand.
  • Easy and fast switching from PC to APC, no change of ferrule holder required.
  • Connector key adaptors for most connector types. Special design provides easy loading feature.
  • Interfaceable to laptop computers, only one USB2 link required.
  • White-Light scanning option for extended fiber height range.

Daisi -MT v3

Based on the design and philosophy which made the DAISI a success, here is the brand new DAISI-MT White-Light / Red-Light interferometer, dedicated to the measurement of end-face geometry of multi-fiber ferrules (single-fiber capability). Its revolutionary design makes it ideal for the use in the production environment as well as field applications. Non-compressed, real time and high quality images are transferred from the hardware to the software via USB high speed links at speeds up to 100 images per second in addition to the automation and control commands.

DAISI-MT is portable and can be interfaced to laptop or desktop computers. All calibration steps are automated and embedded into a user-friendly software interface in order to yield error-free and reliable measurements.

Mechanics and electronics
White-Light interferometers’ mechanical and electronic design is more challenging than Red-Light (monochromatic) interferometer’s design. The whole optical system must be translated over several dozens of microns with nanometric precision and in a perfectly linear fashion.

DAISI-MT system does just that: based on a 30 microns stroke closed-loop piezoelectric transducer, the focus is smoothly, precisely and quickly scanned across the sample surface in less than 10 seconds.

  • Single unit for measurement of all types of Single-fiber and Multi-fiber ferrules (MT-X, MPO, Mini-MT (MT-RJ), etc.) PC and APC.
  • Measure up to 100 fibers in a single scan with DAISI-MT mega-pixel high resolution camera.
  • Combined White-Light and Red-Light phase-shifting interferometer.
  • Vibration insensitive. No specific isolation table required.
  • Closed-loop high precision 30 microns Z scanning range.
  • Non-contact measurement.
  • Rapid autofocus.
  • One button easy operation.
  • Automatic calibration of reference mirror.
  • No exterior moving parts or adjustment screw -> No apex de-calibration.
  • Easy and fast switching from PC to APC, no change of ferrule holder required.
  • Connector key adapters for most connector types. Special design provides easy loading feature.
  • Fast and automated measurement of endface parameters as required by standards.
  • Accurate and repeatable measurements.
  • Interfaceable to laptop computers, USB link required.
  • Compliance with Industry Standards for Interferometer Measurements
  • High resolution 2D & 3D surface profiles
  • Measurement Report and History Report
  • Low heat, long life LED illumination
Links
Language
My account