SUBSCRIBER CABLE INDOOR CABLE IN/OUTDOOR CABLE OUTDOOR CABLE TACTICAL CABLE INDUSTRIAL/MARITIMECABLE Cable type QXXI Outdoor and indoor cable for LAN and WAN. Eliminates the transition joint between the installation inside and outside. Robust metal-free cable with a temperature range appropriate for Nordic conditions. Dry core with swelling material and jelly-filled fiber tubes to prevent longitudinal water ingress. UV stabilized outer jacket. Fiber type: Single mode Colour outer sheath: Yellow CPR fire class: Eca Cable type QXXI SLIM A compact version of QXXI. The cable is delivered with 1.6 mm fiber tubes compared to 2.3 mm in QXXI. This gives a lower weight and a reduction in cable diameter from 10.5 mm to 7.3 mm for 48-fiber cable. Well suited for introduction to node / fiber rooms in buildings and for area cabling. Especially in areas with large amounts of cables or reduced diameter in ducts and pipes. Fiber type: Single mode Colour outer sheath: Yellow CPR fire class: Dca -s2,d2,a2 Cable type QXXE Micro Outdoor metal-free and halogen-free (ZH) micro cable for installation in microtubes. Lose tubes with thermoplastic material containing optical fibers and filled with a suitable water tightness compound. The cable is very compact and offers an outer diameter of only 6.3 mm for 48 fibers. Often used as an insertion cable in node that are not subject to the CPR regulations. Fiber type: Single mode Colour outer sheath: Black Cable type AXAI Flexible backbone cable which are suitable for LAN and WAN and is intended for both indoor and outdoor installations. Robust, metal-free cable with a temperature range appropriate for Nordic conditions. UV-stabilized outer jacket, dry core with swelling agent to prevent longitudinal water ingress. Fiber type: Single mode and Multimode Colour outer sheath: Yellow (SM), Purple (MM OM4), Turquoise (MM OM3), Orange (MM OM2), Grey (MM OM1) CPR fire class: Dca-s2,d2,a1 Cable type QXAI HD Ultra compact multi-fibre cable for data centres with 12 fibre Flextubes® and up to 144 fibres. The intended application for this cable is as distribution cable inside data centres and central offices. Fits to 12 way multi fibre connectors according to IEC 61754-1-1 such as the MPO® and MTP® connectors with proper fanout. Fiber type: Single mode and Multimode Colour outer sheath: Yellow (SM), Turquoise (MM OM3), Purple (MM OM4) CPR fire class: Dca -s2,d2,a1 Cable type AXXI The cable is dry and complies with all smoke and fire technical requirements. It can therefore be led into buildings, so that you avoid respliceing at the entry point. The cable is often used as entrance cable from the last splice closure outdoor, and to ODF indoor, as an alternative to AXAI. Fiber type: Single mode and Multimode Colour outer sheath: Black CPR fire class: Eca EN 50575:2014 +A1:2016)