8-fibre AXAI, 9/OS2, SC/PC-SC/PC

Pre-terminated cable for mounting in FOSS panel type FP70. The cable is terminated in both ends when delivered.

• Connector: SC/PC according to IEC 61 754-4
• Fibre type: Single mode according to ITU-T G.657A1, EN 50173-1 OS2
• Quality: IEC 61755-1 class C2
• Cable: AXAI, tight buffer, fire retardant and halogen free, yellow
• Enables fast and secure mounting in FOSS panel FP70
• Combined in- and outdoor use
• Other lengths are quickly delivered from our production in Drammen. Please contact us

Description

The pre-terminated cable is delivered with connectors at one or both sides. The cable is prepared for installation in FOSS FP70 and FP80 panel* - 80 cm of the fibre is protected by a spiral cable wrap and may therefor be placed under the drawer. This simplifies maintenance because it enables you to take the drawer out of the panel (without loosening the fibres from their guides).  As an option the connector sides of the cable may be protected with a flexible tube. This is often used if this side needs to be pulled for a long distance. Outside this tube an optional cable pulling grip may be placed if the cable shall be pulled through tubes.  

* cable for FP60 may be delivered on request  

Specifications  

Cable type:  
Tight buffer, AXAI, several colours (see fibre type)               Flame retardant, Zero halogen  
Tight buffer, AXXI, black                                                               Flame retardant, Zero halogen

Diameter cable:   
5/6/6.5/8 mm                 4/8/12/24-fibre AXAI  
9.6/9.6/9.9/10.8 mm      4/8/12/24-fibre AXXI

Tension strength cable:     
440/680/900/1400 N               4/8/12/24-fibre AXAI  
800 N                                          AXXI

Diameter w/cable grip:       
34 mm                                       4-fibre  
40 mm                                       8/12/24-fibre

Tension strength cable grip:  
350 N    

Fibre type:     
ITU-T G.657.A1 (compatible with G.652.D)          AXAI  
ITU-T G.652.D                                                             AXXI  
OS-2                                                                            EN 50173-1 

Insertion loss connectors:             
< 0.5 dB @ 1310/1550 nm                    < 0.15 dB typical 

Return loss connectors:  
< -45 dB @ 1310/1550 nm for PC              < -50 dB typical  
< -60 dB @1310/1550 nm for APC            < -65 dB typical

Classification, connectors:
Class C2 (PC), class C1 (APC)                  IEC 61755-1 

Operating temperature:  
-40°C to 60°C