Náradie

Alcohol dispenser with integrated pump. For storing of technical alcohol that is used for cleaning of fibre optic cables.

The tool consists of a plier with replaceable knife trays ranging over five different tube dimensions. The knife trays have two knives so that the tubes are split into two halves, which makes it simple to remove the tubes in a safe manner. When splicing and dropping fibre with loose tube it may be beneficial to split the tubes length-wise over a shorter length, a so-called window cut. 

5-Channel Mid-Span Fiber Access Tool. The buffer tube splitter is used for splitting fibre tubes length-wise in order to get access to some of the optical fibres in the tube without cutting all of them. The buffer tube splitter fits tube dimensions from 1.9 to 3.0 mm.

Dual channel fiber access tool. This truly versatile, lightweight tool provides unprecedented flexibility in the field, for MDU and FTTx application.

The cable stripper is well suited for circular cutting and lengthwise splitting of the jacket of optical cables.

Cable stripper for tubes and softer cable jackets with a diameter of up to 3.2 mm.

Cable stripper for tubes and soft cable jackets with diameter from 3.2 to 5.6 mm. Quality tools suited for fibre optical work.

Package with 3 extra cartridges to connector cleaner, pen type ATC-NE-E1.

Package with 3 extra cartridges to connector cleaner, pen type ATC-NE-E3.

Cletop connector cleaner is made for efficient cleaning of optical connectors during installation and service. The cleaner contains a cleaning tape which is pulled forward every time the cleaner is used. The cleaner’s cleaning tape may be refilled.

Cletop connector cleaner is made for efficient cleaning of optical connectors during installation and service. The cleaner contains a cleaning tape which is pulled forward every time the cleaner is used. The cleaner’s cleaning tape may be refilled.

For cleaning optical connectors in those cases where the contamination cannot be cleaned with dry cleaning and fiber optical fibres prior to splicing and termination. The cleaning fluid comes in a tight 85 g pump/spray container that can be stored in your existing tool sets without risking spills.