Polishing film sheet, 3.0 µm, pink

Polishing film sheet, 3.0 µm, pink

The Fiber optic patch panel 1.5U for LC DPX adapters is delivered in painted aluminium for terminating fibre optical cables. The panel has a drawer that ensures simple assembly and later maintenance of cables and connectors. The panel may be delivered for most optical interfaces and have a capacity of up to 96 LC connectors. In the back of  the panel there are 4 cable entrances, 2 on each side. For termination of many small cables a special cable entrance may be delivered. 

MPO fiber patch panel with pre-installed MPO to LC fan-out. High density fiber optic management system reduces needed space, deployment time and is easy to use.

The Fiber optic patch panel 1U for LC Quad adapters is delivered in white or black painted aluminium. There is room for 96 LC connectors on the front. For special needs a front with room for 144 LC connectors may be delivered. The panel is delivered with an integrated installation set that will simplify installation and ensure that all requirements for bend diameters are adhered to. 

Outdoor metal-free and halogen-free (ZH) micro cable for installation in microtubes. Lose tubes with thermoplastic material containing optical fibers and filled with a suitable water tightness compound. The cable is very compact and offers an outer diameter of only 6.3 mm for 48 fibers. Often used as an insertion cable in node that are not subject to the CPR regulations.

Cletop connector cleaner is made for efficient cleaning of optical connectors during installation and service. The cleaner contains a cleaning tape which is pulled forward every time the cleaner is used. The cleaner’s cleaning tape may be refilled.