Skip to main content
To top
Card payment
International Shipping
Customer Service

Plug & Play
DIRECT CABLING

Cabling directly from the subscriber wall box to the panel in the technical room. A 2-fiber, white subscriber cable is used. In one end there is a pre-terminated subscriber wall box with two SC/PC connectors. In the other end, the subscriber cable is terminated with a reinforced breakout with two LC/PC connectors. This is one of the smallest connectors and enables pulling through small ducts. The end with the breakout is also supplied with a protective pulling sock.

You can connect up to 12 pcs. subscriber wall boxes to each panel. When connecting to the panel, the cable is simply attached with strips and connectors are plugged into the ready-made LC/PC duplex adapter panel. Since a 2-fiber cable with connectors is used, the Plug & Play solution can be easily used in both 1-fiber and 2-fiber communication solutions.



SUBSCRIBER WALL BOX

The subscriber wall box with pre-terminated cable is delivered on a cardboard box with a drum and the wall box connected to the inner end of the cable. After measuring the cabling lengths, you can order different lengths of cable on the drums. An excess length must be added in the order. This excess length is handled in the technical room either with storage units in the panels or in a coiling management frame.

Fiber optic FTH Wall box, 2 SC/APC, 5m cable on cardboard drum, 9/OS2/4500

CommScope HFTP wall box (CK7246-000) with 2 SC/APC (CK7246-000) and bend resistant fiber according to ITU-T G.657.A2

CK7246-2SSCA-050-E
Fiber optic FTH Wall box, 2 SC/APC, 15m cable on cardboard drum, 9/OS2/4500

CommScope HFTP wall box (CK7246-000) with 2 SC/APC (CK7246-000) and bend resistant fiber according to ITU-T G.657.A2

CK7246-2SSCA-150-E
Fiber optic FTH Wall box, 2 SC/APC, 30m cable on cardboard drum, 9/OS2/4500

CommScope HFTP wall box (CK7246-000) with 2 SC/APC (CK7246-000) and bend resistant fiber according to ITU-T G.657.A2

CK7246-2SSCA-300-E
Fiber optic FTH Wall box, 2 SC/APC, 50m cable on cardboard drum, 9/OS2/4500

CommScope HFTP wall box (CK7246-000) with 2 SC/APC (CK7246-000) and bend resistant fiber according to ITU-T G.657.A2

CK7246-2SSCA-500-E


TECHNICAL ROOM

Panel

Patch Panel 1U, 4 LC/PC, adapter, SM

Fiber optic patch panel 1U with 4 pre-assembled single mode LC/PC adapters. The panel is delivered with an integrated installation set that will simplify installation and ensure that all requirements for bend diameters are adhered to.

FP65-4SLC-A
Patch Panel 1U, 8 LC/PC, adapter, SM

Fiber optic patch panel 1U with 8 pre-assembled single mode LC/PC adapters. The panel is delivered with an integrated installation set that will simplify installation and ensure that all requirements for bend diameters are adhered to.

FP65-8SLC-A
Patch Panel 1U, 24 LC/PC, adapter, SM

Fiber optic patch panel 1U with 24 pre-assembled single mode LC/PC adapters. The panel is delivered with an integrated installation set that will simplify installation and ensure that all requirements for bend diameters are adhered to.

FP65-24SLC-A
Patch Panel 1U, 12 LC/PC, adapter, SM

Fiber optic patch panel 1U with 12 pre-assembled single mode LC/PC adapters. The panel is delivered with an integrated installation set that will simplify installation and ensure that all requirements for bend diameters are adhered to.

FP65-12SLC-A
Patch Panel black 1U, 12 LC/PC, adapter, SM

Fiber optic patch panel 1U black with 12 pre-assembled single mode LC/PC adapters. The panel is delivered with an integrated installation set that will simplify installation and ensure that all requirements for bend diameters are adhered to.

FP65S-12SLC-A
Patch Panel black 1U, 8 LC/PC, adapter, SM

Fiber optic patch panel 1U black with 8 pre-assembled single mode LC/PC adapters. The panel is delivered with an integrated installation set that will simplify installation and ensure that all requirements for bend diameters are adhered to.

FP65S-8SLC-A
Patch Panel black 1U, 24 LC/PC, adapter, SM

Fiber optic patch panel 1U black with 24 pre-assembled single mode LC/PC adapters. The panel is delivered with an integrated installation set that will simplify installation and ensure that all requirements for bend diameters are adhered to.

FP65S-24SLC-A

CABINET


In smaller buildings where the need for capacity is lower, this small wall cabinet is an alternative to a rack. Inside the fiber cabinet it is mounting profiles inn aluminum, this gives an unique flexibility. The mounting profiles can be adjusted in depth and adapted to individual needs. In the cabinet, you can use additional equipment such as bend limiter, routing guide, power outlets, shelves etc.

SOLUTION FOR EXCESS LENGTH OF CABLES 
 

Shelves and storage units, for excess length of cables, are mounted in under the panel.

Shelf 1.5U for routers and other network equipment, D300 mm

Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.

MP452
Shelf 1U retractable for routers and other network equipment, D350 mm

Shelf retractable for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.

MP530
Cable Storage unit, 0.5U

Storage unit for mounting under fiber optic panel used for storing excess lengths of patch cords.

FP70310
Cable Storage unit, 0.5U, black

Storage unit for mounting under fiber optic panel used for storing excess lengths of patch cords.

FP70310S

TOOLS FOR ASSEMBLY

One-Click connector cleaner used for professional cleaning of optical connectors. Over 500 cleanings per unit (One-Click). Efficient cleaning of optical connectors can prevent losses and reflections which in turn can cause communication errors.

For Plug & Play, this is all the fiber tool you need. An end face fiber microscope can also be used to check the surfaces of the contacts.

Connector cleaner, pen type, OneClick, SC, FC, ST

One-Click connector cleaner used for professional cleaning of optical connectors.

OCC-A
Connector cleaner, pen type, OneClick, LC, MU

One-Click connector cleaner used for professional cleaning of optical connectors.

OCC-B
Connector cleaner, pen type, OneClick, MTP/MPO

One-Click connector cleaner used for professional cleaning of optical connectors. More than 500 cleanings, for MPO/MTP connectors.

MPO-CLK-D
Digital Microscope P5000i, to inspect fiber optic

Digital microscope to inspect fiber connector endfaces. A high quality microscope for inspecting optical connectors and bulkhead connectors. The probe is delivered with FiberChekPRO software for automatic analysis of the connectors end face.

FBP-SD101

Need any help or want to know more?

Feel free to contact us if you need any help choosing the right product for your organization. 
Phone: +47 32 21 08 00
Mail: info@foss-as.no


Links
Language
My account