Fiber optic Rack for front mounted equipment, with retracted installation. It is produced in aluminium ensuring low weight and simple transport. It has profiles with slide rails that allows continuous height adjustment of nut and screw when installing equipment. Delivered flat-packed, so that one person can easily carry and mount the rack alone. Flexi Rack 19"/ETSI, B800xH2200xD800, self supported duo
The Flexi Rack series is available in 19" design in standard heights 1800, 2000 and 2200 mm. Other widths and heights, as well as ETSI section width, can be supplied on request. The Flexi Rack series can also be supplied with side organizers for optimal fiber patch routing. The racks series offer high termination capacity.
This racks is designed so that the front plate of the equipment is mounted 15 cm offset from front line of the rack. This to protect front mounted connectors.
The installer can choose between ETSI or 19" version during installation (all components are included).
- For floor-mounting
- Equipment can be mounted in both front and back
- Extra 19'' profiles to avoid front mounting
- Aluminum frames
- 2 cable trays with 161 mm width is included
- With 1 section, 800 mm
- Accessories available: cable trays, guide bars, legs, etc.
Cable ladder used for fastening cables and tubes to the rack.
Cable ladder used for fastening cables and tubes to the rack.
Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Shelf retractable for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Screw with spring nut for FR racks. The spring nut can be adjusted continuously height-wise in the rack.
Bend limiter for avoiding sharp bends on fiber optic patch cords in rack. Bend diameter 30 mm
Bend limiter for avoiding sharp bends on fiber optic patch cords in rack.
Guide to be placed in the middle of the vertical cord guide to keep the patch cords together.
Large brackets for sliding equipment onto. Fasten one on each sidewall in the racket.
Routing guide used on fan-out units to avoid that weight creates sharp bends or cord stress, may also be used to separate some patch cords from the rest.
Cable distributor used to separate the fibre-tubes in large cables to terminate them in different fiber optic panels.
Bend limiter for mounting on the top of the rack. Offload patch cords which must be guided over the top.
Angled bracket for mounting cable ladders and other equipment in racks.
Recently viewed
Fiber optic Rack for front mounted equipment, with retracted installation. It is produced in aluminium ensuring low weight and simple transport. It has profiles with slide rails that allows continuous height adjustment of nut and screw when installing equipment. Delivered flat-packed, so that one person can easily carry and mount the rack alone. Flexi Rack 19"/ETSI, B800xH2200xD800, self supported duo
Fiber optic patch panel with a built-in CWDM multiplexer and demultiplexer, terminated in SC/PC connectors. Passive CWDM units are a reliable and reasonable method for transferring several wavelengths/signals over the same fiber (wavelength multiplexing). 2 x 8+1 channel CWDM, 1471-1611/1310 + Monitor port, SC/PC.
AICI is a steel wire braided armored fiber optic cable designed for industrial and offshore applications. This cable meets fire safety requirements and can be used both indoors and outdoors. The cable features a weather-resistant outer sheath that can also withstand exposure to mineral oils and diesel over short periods.
Fan-out fiber optic cables for indoor use are delivered with 12 or 24 optical fibres. They are used as converters between MPO and LC/PC.
Fan-out fiber optic cables for indoor use are delivered with 12 or 24 optical fibres. They are used as converters between MPO and LC.
A flexible and small distribution box for fiber optics, suitable for DIN rail mounting or directly on the wall. Both the lid and the adapter plate can be removed, making it easy to work in the box.
AICI is a steel wire braided armored fiber optic cable designed for industrial and offshore applications. This cable meets fire safety requirements and can be used both indoors and outdoors. The cable features a weather-resistant outer sheath that can also withstand exposure to mineral oils and diesel over short periods.
A flexible and small distribution box for fiber optics, suitable for DIN rail mounting or directly on the wall. Both the lid and the adapter plate can be removed, making it easy to work in the box.
Adapter plate for Wall cabinet 24 (400940) with 12 holes for up to 12 SC DPX adapters (24 fibres).
Single mode OTDR, two wavelengths. Including power meter, VFL, SLM, WiFi and soft carrying case.
AICI is a steel wire braided armored fiber optic cable designed for industrial and offshore applications. This cable meets fire safety requirements and can be used both indoors and outdoors. The cable features a weather-resistant outer sheath that can also withstand exposure to mineral oils and diesel over short periods.
Single mode attenuated patch cord with SC/PC-SC/PC connector. Attenuation from 1 to 20 dB, diameter is 2.0 mm and standard length is 1 m.