Wall mounted Fiber optic Rack for front mounted equipment, with retracted installation. It is produced in aluminium ensuring low weight and simple transport. It has profiles with slide rails that allows continuous height adjustment of nut and screw when installing equipment. Delivered flat-packed, so that one person can easily carry and mount the rack alone. Flexi Rack 19", B600xH2200xD400, wall mount
The Flexi Rack series is available in 19" design in standard heights 1800, 2000 and 2200 mm. Other widths and heights, as well as ETSI section width, can be supplied on request. The Flexi Rack series can also be supplied with side organizers for optimal fiber patch routing. The racks series offer high termination capacity.
This racks is designed so that the front plate of the equipment can optionally be mounted 12 to 15 cm offset from front line of the rack. This to protect front mounted connectors.
- For wall-mounting
- Extra 19 '' profiles to avoid front mounting
- Aluminum frames
- With 1 section, 600 mm
- Accessories available: cable trays, guide bars, legs, etc.
Cable ladder used for fastening cables and tubes to the rack.
Cable ladder used for fastening cables and tubes to the rack.
Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Shelf retractable for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Screw with spring nut for FR racks. The spring nut can be adjusted continuously height-wise in the rack.
Bend limiter for avoiding sharp bends on fiber optic patch cords in rack. Bend diameter 30 mm
Bend limiter for avoiding sharp bends on fiber optic patch cords in rack.
Guide to be placed in the middle of the vertical cord guide to keep the patch cords together.
Large brackets for sliding equipment onto. Fasten one on each sidewall in the racket.
Routing guide used on fan-out units to avoid that weight creates sharp bends or cord stress, may also be used to separate some patch cords from the rest.
Cable distributor used to separate the fibre-tubes in large cables to terminate them in different fiber optic panels.
Bend limiter for mounting on the top of the rack. Offload patch cords which must be guided over the top.
Angled bracket for mounting cable ladders and other equipment in racks.
Recently viewed
Wall mounted Fiber optic Rack for front mounted equipment, with retracted installation. It is produced in aluminium ensuring low weight and simple transport. It has profiles with slide rails that allows continuous height adjustment of nut and screw when installing equipment. Delivered flat-packed, so that one person can easily carry and mount the rack alone. Flexi Rack 19", B600xH2200xD400, wall mount
Fiber optic subscriber cable with 2xSC/APC connectors with 0.9 mm ending. For wideband cabling for use in private homes.
Adapter plate for Wall cabinet 24 (400940) with 24 holes for up to 24 ST, FC or DIN adapters.
A flexible and small distribution box for fiber optics, suitable for DIN rail mounting or directly on the wall. Both the lid and the adapter plate can be removed, making it easy to work in the box.
Fiber optic adapter E2000 DPX for single mode PC‐polished E2000‐connectors. Compatibility: IEC 61754‐15
Ground tactical cables for use in harsh environments where deployment and retrieval for reuse is required. The fiber optic field cable is suitable for use in the industrial, offshore and aquaculture sectors. OCC field cable, D-series, Fiber type 9/125
Multimode OM1 Probeam Sr. 4 channel bulkhed. Jam nut D hole mounting.
Insertion loss: 15 dB, +/- 1,5 dB. Return loss: < ‐50 dB. Single mode. 1250-1650 nm
Multimode OM1 Probeam Jr. 4 channel bulkhead. Jam nut D hole mounting.
Fiber optic patch panel with WDM multiplexer and demultiplexer terminated in SC connectors. Passive WDM panels are a reliable and reasonable method for transferring 2 wavelengths signals over the same fiber (wavelength multiplexing).
DIN wall box for fiber optic with pre-assembled multimode OM2 ST adapters and pigtails. DIN-rail mount or directly on wall, simple access inside panel.