Wall mounted Fiber optic Rack for front mounted equipment, with retracted installation. It is produced in aluminium ensuring low weight and simple transport. It has profiles with slide rails that allows continuous height adjustment of nut and screw when installing equipment. Delivered flat-packed, so that one person can easily carry and mount the rack alone. Flexi Rack 19", B550 x H900 x D400, wall mounted
The Flexi Rack series is available in 19" design in standard heights 1800, 2000 and 2200 mm. Other widths and heights, as well as ETSI section width, can be supplied on request. The Flexi Rack series can also be supplied with side organizers for optimal fiber patch routing. The racks series offer high termination capacity.
- For wall-mounting
- Aluminum frames
- Width: 1 section, 550 mm
- Accessories available: cable trays, guide bars etc.
Cable ladder used for fastening cables and tubes to the rack.
Cable ladder used for fastening cables and tubes to the rack.
Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Shelf retractable for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Screw with spring nut for FR racks. The spring nut can be adjusted continuously height-wise in the rack.
Bend limiter for avoiding sharp bends on fiber optic patch cords in rack. Bend diameter 30 mm
Bend limiter for avoiding sharp bends on fiber optic patch cords in rack.
Guide to be placed in the middle of the vertical cord guide to keep the patch cords together.
Large brackets for sliding equipment onto. Fasten one on each sidewall in the racket.
Routing guide used on fan-out units to avoid that weight creates sharp bends or cord stress, may also be used to separate some patch cords from the rest.
Cable distributor used to separate the fibre-tubes in large cables to terminate them in different fiber optic panels.
Bend limiter for mounting on the top of the rack. Offload patch cords which must be guided over the top.
Angled bracket for mounting cable ladders and other equipment in racks.
Recently viewed
Wall mounted Fiber optic Rack for front mounted equipment, with retracted installation. It is produced in aluminium ensuring low weight and simple transport. It has profiles with slide rails that allows continuous height adjustment of nut and screw when installing equipment. Delivered flat-packed, so that one person can easily carry and mount the rack alone. Flexi Rack 19", B550 x H900 x D400, wall mounted
An indoor wall-mount box for efficient termination of fiber optic cables with pre-assembled single mode SC/PC adapters and pigtails.
Fan-out fiber optic cables for indoor use are delivered with 12 or 24 optical fibres. They are used as converters between MPO and LC.
Multimode OM1 Probeam Sr. 4 channel bulkhead. Jam nut D hole mounting.
Tactical reel in lightweight aluminum with capacity for around 100 m ProBeam tactical fiber optic cable. The reels are designed for handling fiber cables in temporary installations. It can be stacked, has room on the inside for storing connectors (size up to Probeam Sr.) and the crank handle can be folded in when it is not being used. The drums have brakes, fold-in swivel handles, and drums of the same size can be stacked in height. As standard, the drums are painted in military green RAL 6014, other colors available on demand.
Splitter based on Planar Waveguide technology where the light is guided through waveguides in a substrate. The waveguides are branched out according to how much the light should be split. This facilitates for physical small splitters up to 1:64. Operative wavelength: 1260 - 1620 nm.
Subscriber fiber optic cable with SC/PC connectors. For cabling from home central, fibre optic wall outlet to outdoor wall box in detached houses and townhouses
ProBeam ruggedized connectors for optical communication in rough environments within defense and industry. Singlemode tactical cable with 4 channel ProBeam Jr. plugs in each end. Probeam connectors are hermaphroditic so cables can be daisy chained.
DIN wall box for fiber optic with pre-assembled multimode OM2 ST adapters and pigtails. DIN-rail mount or directly on wall, simple access inside panel.
Fiber optic patch panel delivered complete with 1:16 splitter terminated in SC/PC connectors. Can be mounted in 19 and metric cabinets/racks for compact cabling in data rooms.