Wall mounted Fiber optic Rack for front mounted equipment, with retracted installation. It is produced in aluminium ensuring low weight and simple transport. It has profiles with slide rails that allows continuous height adjustment of nut and screw when installing equipment. Delivered flat-packed, so that one person can easily carry and mount the rack alone. Flexi Rack 19", B550 x H600 x D400, wall mounted
The Flexi Rack series is available in 19" design in standard heights 1800, 2000 and 2200 mm. Other widths and heights, as well as ETSI section width, can be supplied on request. The Flexi Rack series can also be supplied with side organizers for optimal fiber patch routing. The racks series offer high termination capacity.
- For wall-mounting
- Aluminum frames
- Width: 1 section, 550 mm
- Accessories available: cable trays, guide bars etc.
Cable ladder used for fastening cables and tubes to the rack.
Cable ladder used for fastening cables and tubes to the rack.
Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Shelf retractable for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.
Screw with spring nut for FR racks. The spring nut can be adjusted continuously height-wise in the rack.
Bend limiter for avoiding sharp bends on fiber optic patch cords in rack. Bend diameter 30 mm
Bend limiter for avoiding sharp bends on fiber optic patch cords in rack.
Guide to be placed in the middle of the vertical cord guide to keep the patch cords together.
Large brackets for sliding equipment onto. Fasten one on each sidewall in the racket.
Routing guide used on fan-out units to avoid that weight creates sharp bends or cord stress, may also be used to separate some patch cords from the rest.
Cable distributor used to separate the fibre-tubes in large cables to terminate them in different fiber optic panels.
Bend limiter for mounting on the top of the rack. Offload patch cords which must be guided over the top.
Angled bracket for mounting cable ladders and other equipment in racks.
Recently viewed
Wall mounted Fiber optic Rack for front mounted equipment, with retracted installation. It is produced in aluminium ensuring low weight and simple transport. It has profiles with slide rails that allows continuous height adjustment of nut and screw when installing equipment. Delivered flat-packed, so that one person can easily carry and mount the rack alone. Flexi Rack 19", B550 x H600 x D400, wall mounted
Dual channel fiber access tool. This truly versatile, lightweight tool provides unprecedented flexibility in the field, for MDU and FTTx application.
Subscriber fiber optic cable with LC/PC connectors. For cabling from home central/Fibre optic wall outlet to outdoor wall box in detached houses and townhouses
Fiber optic adapter LC Duplex for multi mode LC‐connectors (OM4). Compatibility: IEC 61754‐20
Ground tactical cables for use in harsh environments where deployment and retrieval for reuse is required. The fiber optic field cable is suitable for use in the industrial, offshore and aquaculture sectors. OCC field cable, D-series, Fiber type 62./125. OM1
Fiber optic patch panel with a built-in CWDM multiplexer and demultiplexer, terminated in SC/PC connectors. Passive CWDM units are a reliable and reasonable method for transferring several wavelengths/signals over the same fiber (wavelength multiplexing). 18-channel CWDM, SM, 1270-1610, SC/PC
Fiber patch Panel 1U with pre-terminated fiber optic cable type QXAI-HD and 2x48 LC/PC adapters. Can be mounted in 19" and metric cabinets/racks for compact cabling in data rooms.
Hybrid fiber optic connector used for give both power and data. Singelmode 20 m cable with MIL83526 DM4 - MIL83526 DM4. IP class IP68 rated. This hybrid connector is typically used for give both power and data connection to antennas and cameras.
AICI is a steel wire braided armored fiber optic cable designed for industrial and offshore applications. This cable meets fire safety requirements and can be used both indoors and outdoors. The cable features a weather-resistant outer sheath that can also withstand exposure to mineral oils and diesel over short periods.
ProBeam Jr. ruggedized connectors terminated on fiber optic cable AXAI for optical communication in rough environments within defense and industry. Multimode OM3, PBJR connector-SC. Jam nut D hole mounting.
Fiber optic patch panel delivered complete with 1:16 splitter terminated in SC/PC connectors. Can be mounted in 19 and metric cabinets/racks for compact cabling in data rooms.