This splice closure in plastic is one of several in the FOSC series. The splice closure consists of few parts and is very easy to install.
- Indoor/outdoor use
- Casing class IP68
- Capacity of 96 splices (250 to 250 µm)
- 24 splices in each tray
- 4 trays (1 tray included)
- 4 round cable entries + 1 oval (heat shrink tube for oval port included)
- Possibility for storing uncut fibre in storage basket (midspan access)
Dimensions: 540x180 mm
Splice closure fits Cable Management frame type B4.
The cable management frame is primarily used in access points in FTTH networks. It is mounted to wooden poles using the included screws. The frame consists of a main part where the closure is fastened with a strap (included) and a pole part that is mounted to the pole. The main part may rotate on the pole part witch is practical when winding up the cable.
The Cable Management frame fits several types of splice closures on the market.
The bend limiter is a chain with a given minimum diameter that is used when uncut fibre tubes shall be led through the oval hole of a splice closure. With the chain, the tubes can be led into the closure in a safe manner without risking breakage.
O-ring for the splice closures FIST-GCO2-Bx and FOSC-400D5.
The storage basket is used for coiling fibre tubes that are uncut. Fits FOSC-400B4/24/96.
Round heat shrink tube for the splice closures FOSC-400B4/24/96, FOSC-400B4/24/144, FOSC-400D5/24/288, FOSC-400D5/72/576 and FOSC-400G.
Oval heat shrink tube for the splice closures FOSC-400B4/24/96, FOSC-400B4/24/144, FOSC-400D5/24/288, FOSC-400D5/72/576 and FOSC-400G.
The use of a work stand makes working with the rigging and mounting of splice closures easier. The stand fits all the splice closures in the FOSC series.
Pole mount bracket for wooden poles made of composite materials. The bracket fits both Cable Management frames (B4 and D5) and provides a good distance between the Cable Management frame and the mast.
Only one opening prevents wrong fibre positioning
Adjustable cable management frame suitable for both small and large closures. The slim profile minimizes visibility.
Recently viewed
This splice closure in plastic is one of several in the FOSC series. The splice closure consists of few parts and is very easy to install.
Fiber optic Module panel with factory-installed pre-terminated cable. The series includes pluggable modules mounted in a 1U or 3U frame. This gives a flexible solution that easily may be expanded as needed.
Easy to use robust fiber optic connector, sealed to IP67. Singelmode tactical cable with 2 fiber QSeal in each end.
Fiber optic patch panel 1.5U with pre-assembled single mode SC/PC adapters and pigtails. The panel has a drawer that ensures simple assembly and later maintenance of cables and connectors. The panel may be delivered for most optical interfaces and have a capacity of up to 96 LC connectors.
Pre-terminated break-out fiber optic cable with E2000/APC-E2000/APC connectors. The AXAI single mode cable is terminated in both ends when delivered, each fibre in the cable is distributed to the ends via a fan-out. Combined in- and outdoor use.