This splice closure in plastic is one of several in the FOSC series. The splice closure consists of few parts and is very easy to install.
- Indoor/outdoor use
- Casing class IP68
- Capacity of 96 splices (250 to 250 µm)
- 24 splices in each tray
- 4 trays (1 tray included)
- 8 round cable entries + 1 oval (heat shrink tube for oval port included)
- Possibility for storing uncut fibre in storage basket (midspan access)
This splice closure is often used as subscriber box in FTTH facilities due to many cable entries.
Dimensions: 420x180 mm
Splice closure fits the Cable Management frame type B4.
Tray for FOSC splice closures. Fits FOSC-400A4/24/48 and FOSC-400A8/24/96
The cable management frame is primarily used in access points in FTTH networks. It is mounted to wooden poles using the included screws. The frame consists of a main part where the closure is fastened with a strap (included) and a pole part that is mounted to the pole. The main part may rotate on the pole part witch is practical when winding up the cable.
The Cable Management frame fits several types of splice closures on the market.
Oval heat shrink tube for the splice closures FOSC-400A4/24/48 and FOSC-400A8/24/96.
This gel seal is used for splice closure type FOSC-400A8 instead of shrink. This solution is often chosen when the splice closure is used as the last distribution box to the subscribers in FTTH facilities (Fibre to the Home).
O-ring for the splice closures FOSC-400A4, FOSC-400A8 and FOSC-400B4.
Pole mount bracket for wooden poles made of composite materials. The bracket fits both Cable Management frames (B4 and D5) and provides a good distance between the Cable Management frame and the mast.
Adjustable cable management frame suitable for both small and large closures. The slim profile minimizes visibility.
Recently viewed
This splice closure in plastic is one of several in the FOSC series. The splice closure consists of few parts and is very easy to install.
Fiber optic splice closure BUDI 2S-SP a combined indoor/outdoor wall box for splicing fibre. BUDI-2S-SP, 2xSE
8-pack of SC trays for use in FIST wall boxes and FIST splice closures.
Fiber optic splice closure BUDI 1S-SP a combined indoor/outdoor wall box for splicing fibre. A combined indoor/outdoor wall box for splicing fibre.
Fiber patch Panel 1U is delivered with a length of pre-terminated cable that is spliced to the incoming cable at another location. Can be mounted in 19" and metric cabinets/racks.
Open Frame Fiber optic Server Rack 19", with cable organizer right side. Made by lightweight aluminum porfiles for easy handling and installations. Delivered flat-packed, so that one person can easily carry and mount the rack alone. For floor-mounting
Flexible backbone cable which are suitable for LAN and WAN and is intended for both indoor and outdoor installations.
Wavelength filter with standard 8-channel CWDM SM wavelengths.