A flexible and small wall box suited for DIN-rail mounting in cabinets. The box has room for up to 24 LC-connectors or 12 SC– or ST-connectors. Suitable for splicing up to 12 fibres. When using pre-terminated cable with LC the box hold up to 24 fibres. The box has 1 round cable entrances both at the bottom and the top. One M20 cable gland is included for one of the entrances, the other entrance is covered with a plug. There is also holes for 1 or 2 MPO adapters (both at top and bottom) to enable the box to hold fan-outs from MPO to e.g. LC.
Incoming cable may be directly terminated using field connectors (e.g. FAST, UniCam, LightCrimp Plus, FuseConnect) or by splicing pigtails. DIN-Rail clips, M20 gland, fibre guides and splice holder are included.
The box may be delivered with pigtails or pre-terminated cable.
The DIN-rail clip is mounted in the back, on the short side. By using a bracket (not included) the panel may be mounted with the long-side towards the wall - either by using the DIN-clip or by screwing it directly to the wall. The same bracket enables you to place the panel on a standard flush-mounted wall-box. Because there are cable entrances both at top and bottom, the box may be turned upside-down to avoid the connectors turning towards a tight spot.
Foss AS Fiberoptisk Systemsalg
Box 3614, 3007 Drammen,
Company id: NO936010229MVA
+47 32 21 08 00
Foss Fibre Optics s.r.o
Odborárska 52, 831 02 Bratislava
+421 2 48 205 200
News and Articles
Sales and delivery conditions
COPYRIGHT 2022 - FOSS FIBEROPTIKK - ALL RIGHTS RESERVED