Wall mounted rack with 1 section and 2 cable organizers

Cable ladder used for fastening cables and tubes to the rack.

Cable ladder used for fastening cables and tubes to the rack.

Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.

Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.

Shelf retractable for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.

Screw with spring nut for FR racks. The spring nut can be adjusted continuously height-wise in the rack.

Bend limiter for avoiding sharp bends on fiber optic patch cords in rack. Bend diameter 30 mm 

Bend limiter for avoiding sharp bends on fiber optic patch cords in rack.

Guide to be placed in the middle of the vertical cord guide to keep the patch cords together.

Large brackets for sliding equipment onto. Fasten one on each sidewall in the racket.  

Routing guide used on fan-out units to avoid that weight creates sharp bends or cord stress, may also be used to separate some patch cords from the rest.

Cable distributor used to separate the fibre-tubes in large cables to terminate them in different fiber optic panels.

Bend limiter for mounting on the top of the rack. Offload patch cords which must be guided over the top.

Angled bracket for mounting cable ladders and other equipment in racks.

1U (W=25 mm)

21U (W=25 mm)

1 pcs. is used on one side of the rack.